helical worm gear motor

helical worm gear motor
Helical-worm gearmotors
Due to their style and from being combined with a helical equipment stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. Also, they are extremely low-noise and therefore avoid high sound emission levels.
Low-noise continuous operation: gear unit combination optimized regarding efficiency
Do you expect a drive alternative to impress you with its high level of overall performance and efficiency? In that case, we’d recommend our high-quality helical-worm gearmotors EP for you. These could be implemented individually in the modular system. In this manner, they offer you a massive range of sizes, equipment ratios and motor sizes.
However, their greatest strength is certainly their running smoothness and their extremely low noise development. A very important factor is certain – With the helical-worm gearmotors EP you are choosing a robust drive solution which you will hardly even hear.
The overall concept also offers you many more practical product characteristics and benefits. Included in these are the significantly higher performance of the helical-worm combinations instead of single helical-worm gear devices. This is one way you save extra energy in the procedure of your systems and are able to noticeably reduce ongoing operating costs.
You will have the low-noise helical-worm gearmotors EP. – to suit your person requirements – with a wide variety of AC motors. In addition, you can freely configure all the relevant properties. In this manner, you can effectively make use of all the benefits provided by this mixture of low-noise helical-worm gear unit and performance-optimized engine. Even greater variance may be accomplished thanks to the optional flange or foot-mounted style and by selecting between solid and hollow shaft.
Save time and money
By opting for among our gearmotors, you already are saving time and money with this selection and task planning. This is because our modular system allows a multitude of mixture options for gear models and motors. You can for that reason reduce operating costs, count on an extended service life and benefit from simplified maintenance that is feature of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than solitary helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm gear units of series EP
AC motors
Combine the helical-worm gear unit with this AC motors:
Characteristics
Quiet and dependable transmission of torque
High overload capacity
Hardened steel worm gear and bronze alloy worm steering wheel provide exceptional sturdiness and lengthy service life.
Optional heavy duty bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant aluminium alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Obtainable in footed, shaft mount or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm equipment units. Because of their outstanding efficiency, these drives can be used in every industrial sector and tailored to individual torque and quickness requirements. The reduction ratios afforded by the helical-worm gear stage and the reduced noise levels during procedure make these gearmotors ideal low-cost solutions for basic applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique combination of optimized worm wheel material with special lubricants, optimized form, this powerful motor achieves high degrees of effectiveness and torque. The housing machined on all sides enables diverse mounting options. Dual chamber shaft seals are used as standard.
The low contour design helps it be ideal for implementing applications e.g. in the food industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:output shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and surface worm gears: Provides higher efficiencies and higher torque capability in smaller sizes.
Multiple Input Options: Integral gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, installation pilots and flanges offer a wide selection of design solutions.
UNIBLOCK Housing: For maximum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Continues contaminants and water away.
Worldwide Motor: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors established new requirements for reliability, effectiveness and economic climate with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration right now and a future proof remedy. The EP gear motor offers total flexibility in mounting options includes shaft, base, encounter, and flange solutions. The motor terminal box can be mounted in substitute positions rotated in 90º steps around the engine frame providing for unparalleled integration possibilities.
EP gear motors adhere to North American and International criteria, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total answer for our global clients.
Excellent protection of IP65 acc. to IEC 529 assures you that the EP series is usually dirt tight and hose evidence,and can be used outdoors or in wet and dusty environments without the usage of additional enclosures. Complete rated output is offered by the output shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change first after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Regular with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
Due to the unique mixture of optimized worm wheel materials with special lubricants and optimized shape, this powerful geared motor achieves high degrees of effectiveness and torque. The reduced contour design makes it suitable for implementing applications electronic.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – a particularly important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, heavy duty helical gear drives with long life performance features and simplified maintenance. The use of condition of the artwork helical and worm equipment combinations affords optimum efficiency fulfilling a multitude of ratio requirements. The 800 BR is definitely functionally interchangeable with the majority of major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All units shipped pre-lubed for your unique mounting position with KluberSYNTH UH1 6-460
Obtainable in NEMA C-face flanged and immediate input
Projecting and hollow result shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting result shafts
Double and triple reduction ratios
Flanged or foot mounted
All systems adaptable to flooring, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared motor. A favorably priced choice for the standard duties anticipated of a right-angle drive.
5 equipment sizes (S0 to S4).
Electric motor power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors available with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC motor are directly flange mounted, the pinion is on the electric motor shaft. This integrated compact design can be an essential element for the high precision and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as regular.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The degree of efficiency in Ever-Power powerful worm gearboxes and helical worm gearboxes is more than 90%. All worm shafts are produced from case hardened alloy steel and the flanks are precision floor. The worm wheels are made from unique wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, and also adjustable backlash designs are also component of our standard item range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal design. The housings are manufactured from top quality cast iron. The rugget walls and internal ribbing ensure extremely torsional stiff and noise dampening housings. The exterior ripping provides a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from high quality grey cast iron with rugged walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision surface flanks
Worm wheels created from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange installation or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,in addition to adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG

Tags

Recent Posts

Gear box

As one of leading  gear box manufacturers, suppliers and exporters of mechanical products, We offer gear box and many other products.

Please contact us for details.

Mail: [email protected]

Manufacturer supplier exporter of gear box.